ShinDengen Electric MFG.CO.,LTD.

Shindengen expansive product line of semiconductors includes general rectifier diodes used for switching power supplies, world-leading performance bridge diodes, MOSFETs and high-speed rectifier diodes. Shindengen also maintains a large market share in surge protection devices appropriate for induced-surge and over-voltage protection.

Filter:

Features

- High current solution made with high permeability high-performance nanocrystalline material avoids saturation problems at high currents.

- Low insertion losses -4dB ±2dB (@2MHz a 40MHz range).

- More electrical safety: High insulation: 5 kV.

- Safety terminals with double screws connection up to 60 Amps & Standard Safety Terminal blocks for 80 Amps.

- Suitable for Smart meters which comply with PLC G3

-40°C to 85°C for Keyless Entry Systems.

'- Compact equipment: BNC connector integrated in the coupler (other connections available under request).

'- Designed to meet according to EN 50065-1 regulations.-MM models

'-20°C to 85°C Temperature Performance.

'-40°C to 125°C for TPMS applications.

”Breaking” design enables flexibility in different length

(2x) 15V/50mA

> Estimated Total Losses (@100kHz

> Estimated Total Losses (@60kHz

> Estimated Total Losses: (@ 100°C):

> Output Voltage (Sec 1 Sec2) 25 Vdc / 1

> Vin Range=(8-18)V

±12 and ±15VDC

±4 KV com

±5

0.05% Accuracy

0.25 W power rating at 170 °C

0.40mm pitch

0.9/1.5/2.0/2.5/3.0/3.5mm stacking height.

0.9/1.5/2.0mm stacking height.

000 Hours

000 pins

000M

000M Design

048 words 8 bits

048 words x 8 bits

072 words x 8 bits

1 Inch Height

1 W power rating at 110 °C

1 W power rating at 140 °C

1.25 W power rating at 70 °C

1.5KVac isolated between PE and RETURN

1+1 Vertical

10 W power rating

100% burn-in under high ambient temperature (50°C)

100% burn-in under high ambient temperature(50°C)

100% Hi-Pot and burn-in at high ambient temperature

100% Hi-pot tested

100% Hi-pot tested Line input fuse protection

100°C

105°C)

108-pin BGA with 74 GPIO

12 and 24VDC

1200W CRPS Redundant Power Supply

125 kHz / 3.45mH / 7.9x7.9x2.45 mm

125°C solderable.

125kHz

125kHz / 0.19mH / 11.8x3.6x2.5mm

125kHz / 0.735mH / 10x10x3.2mm

125kHz / 1.08mH / 11x2.6x2.2mm

125kHz / 10.80mH / 7.1x2.9x2.05mm

125kHz / 10mH / 17.5x16x4.3mm

125kHz / 10mH / 17x16x4mm

125kHz / 16.0mH / 5.4x2.8x2.9mm

125kHz / 18.5mH / 8.7x2.7x3mm

125kHz / 2.36mH / 13.25x13.55x4.05mm

125kHz / 2.38mH / 10x10x3.2mm

125kHz / 2.38mH / 11.8x3.1x2.6mm

125kHz / 2.38mH / 11.8x3.6x2.5mm

125kHz / 2.38mH / 11x2.6x2.2mm

125kHz / 2.38mH / 13x11.6x3.15mm

125kHz / 2.38mH / 13x11.6x3.45mm

125kHz / 2.38mH / 13x11.6x4.15mm

125kHz / 2.38mH / 13x11.6x4.35mm

125kHz / 2.38mH / 13x11.6x4.7mm

125kHz / 2.38mH / 13x12.8x3.7mm

125kHz / 2.38mH / 14.3x12x2.5mm

125kHz / 2.38mH / 14.4x12.2x1.70mm

125kHz / 2.38mH / 14x12x1.65mm

125kHz / 2.38mH / 6.6x2.3x1.75mm

125kHz / 2.38mH / 7.1x2.9x2.05mm

125kHz / 2.38mH / 7.7x2.5x2.2mm

125kHz / 2.38mH / 7.8x2.2x2.5mm

125kHz / 2.38mH / 8.7x2.7x3mm

125kHz / 2.47mH / 13x11.6x3.15mm

125kHz / 2.47mH / 15.5x17.5x5mm

125kHz / 2.47mH / 17.5x16x4.3mm

125kHz / 2.47mH / 17x16x4mm

125kHz / 2.66mH / 10x10x3.2mm

125kHz / 2.66mH / 11.8x3.6x2.5mm

125kHz / 20kHz / 13x11.6x3.15mm

125kHz / 3.45mH / 13x11.6x3.15mm

125kHz / 3.45mH / 17x16x4mm

125kHz / 4.05mH / 13x11.6x3.15mm

125kHz / 4.05mH / 17x16x4mm

125kHz / 4.50mH / 14.4x12.2x1.70mm

125kHz / 4.50mH / 14x12x1.65mm

125kHz / 4.70mH / 13.25x13.55x4.05mm

125kHz / 4.70mH / 7.7x2.5x2.2mm

125kHz / 4.77mH / 11.8x3.6x2.5mm

125kHz / 4.77mH / 13x11.6x3.15mm

125kHz / 4.77mH / 13x11.6x3.45mm

125kHz / 4.77mH / 13x11.6x4.15mm

125kHz / 4.77mH / 14.4x12.2x1.70mm

125kHz / 4.77mH / 14x12x1.65mm

125kHz / 4.77mH / 17.5x16.0x4.0mm

125kHz / 4.77mH / 17x16x4mm

125kHz / 4.77mH / 4.1x17.2x16.0mm

125kHz / 4.91mH / 10x10x3.2mm

125kHz / 4.91mH / 11.8x3.1x2.6mm

125kHz / 4.91mH / 11.8x3.6x2.5mm

125kHz / 4.91mH / 11x2.6x2.2mm

125kHz / 4.91mH / 12.1x4.0x2.9mm

125kHz / 4.91mH / 13.2x11.8x3.5mm

125kHz / 4.91mH / 13x11.6x3.15mm

125kHz / 4.91mH / 13x11.6x3.9mm

125kHz / 4.91mH / 13x11.6x4.35mm

125kHz / 4.91mH / 13x12.8x3.7mm

125kHz / 4.91mH / 14.3x12x2.5mm

125kHz / 4.91mH / 15.5x17.5x5mm

125kHz / 4.91mH / 17.5x16x4.3mm

125kHz / 4.91mH / 17x16x4mm

125kHz / 4.91mH / 6.6x2.3x1.75mm

125kHz / 4.91mH / 7.1x2.9x2.05mm

125kHz / 4.91mH / 7.7x2.5x2.2mm

125kHz / 4.91mH / 7.8x2.2x2.5mm

125kHz / 4.91mH / 8.7x2.7x3mm

125kHz / 5.89mH / 5.4x2.8x2.9mm

125kHz / 6.38mH / 14.3x12x2.5mm

125kHz / 7.20mH / 10x10x3.2mm

125kHz / 7.20mH / 11.8x11.8x3.35mm

125kHz / 7.20mH / 11.8x3.1x2.6mm

125kHz / 7.20mH / 11.8x3.6x2.5mm

125kHz / 7.20mH / 11x2.6x2.2mm

125kHz / 7.20mH / 12.1x4.0x2.9mm

125kHz / 7.20mH / 12.5x13.5x3.6mm

125kHz / 7.20mH / 13.25x13.55x4.05mm

125kHz / 7.20mH / 13.2x11.8x3.5mm

125kHz / 7.20mH / 13x11.6x3.15mm

125kHz / 7.20mH / 13x11.6x3.45mm

125kHz / 7.20mH / 13x11.6x3.9mm

125kHz / 7.20mH / 13x11.6x4.15mm

125kHz / 7.20mH / 13x11.6x4.35mm

125kHz / 7.20mH / 13x11.6x4.7mm

125kHz / 7.20mH / 13x12.8x3.7mm

125kHz / 7.20mH / 15.5x17.5x5mm

125kHz / 7.20mH / 17.5x16x4.3mm

125kHz / 7.20mH / 17x16x4mm

125kHz / 7.20mH / 5.4x2.8x2.9mm

125kHz / 7.20mH / 6.6x2.3x1.75mm

125kHz / 7.20mH / 7.1x2.9x2.05mm

125kHz / 7.20mH / 7.7x2.5x2.2mm

125kHz / 7.20mH / 7.8x2.2x2.5mm

125kHz / 7.20mH / 8.7x2.7x3mm

125Khz / 7.20mH / 9.5x9.5x3.1mm

125kHz / 9.00mH / 10x10x3.2mm

125kHz / 9.00mH / 11.8x3.1x2.6mm

125kHz / 9.00mH / 11.8x3.6x2.5mm

125kHz / 9.00mH / 11x2.6x2.2mm

125kHz / 9.00mH / 12.1x4.0x2.9mm

125kHz / 9.00mH / 7.1x2.9x2.05mm

125kHz / 9.00mH / 7.8x2.2x2.5mm

125kHz / 9.00mH / 8.7x2.7x3mm

125kHz and 134

12V fan driver

13-channel

13.56MHz / 300mA / 30x323x15.5mm

131-pin BGA with 75 GPIO

131-pin BGA with 81 GPIO

134 kHz

134.2 kHz

134kHz / 2.36mH / 13.25x13.55x4.05mm

134kHz / 4.70mH / 13.25x13.55x4.05mm

134kHz / 6.30mH / 13.25x13.55x4.05mm

134kHz / 7.20mH / 12.5x13.5x3.6mm

134kHz / 7.20mH / 13.25x13.55x4.05mm

134kHz / 7.20mH / 13x11.6x3.45mm

134kHz / 7.20mH / 13x11.6x4.15mm

134kHz / 7.20mH / 13x11.6x4.7mm

134KHz and 20kHz

134kHz)

13560kHz / 1.0uH / 11.8x3.6x2.5mm

13560kHz / 18uH / 17.5x16.0x4.0mm

13560kHz / 2.0uH / 11.8x3.6x2.5mm

13560kHz / 2.2uH / 10x10x3.2mm

13560kHz / 20uH / 11.8x3.6x2.5mm

13560kHz / 2uH / 5.4x2.8x2.9mm

13560kHz / 3.0uH / 11.8x3.6x2.5mm

13560kHz / 3.0uH / 17.5x16.0x4.0mm

13560kHz / 4.5uH / 10x10x3.2mm

13560kHz / 4.7uH / 5.4x2.8x2.9mm

13560kHz / 6.0uH / 11.8x3.6x2.5mm

13560kHz / 6.0uH / 17.5x16.0x4.0mm

13560kHz / 9.0uH / 17.5x16.0x4.0mm

13T / L 36UH (0A) / L25UH (70A) / 100kHz

13x11.6x3.15 mm / 10 mH / 125KHz

140mH / 5.1x2.3x2.6mm / > 1

144 words x 16 bits

144 words x 8 bits

146-pin BGA with 105 GPIO

146-pin BGA with 84 GPIO

15 V/13mA

15-channel

150°C

16-pin QFN package

16-pinQFN package(also available in wafer form)

170mH / 5.1x2.3x2.6mm / > 1

18-75VDC

180°C

192 words x 8 bits

2 point contact design to resist twisting stress.

2 rows

2 type variable voltage outputs including 1.8-3.3V IO voltage

2 W power rating at 110 °C

2 W power rating at 120 °c

2 W power rating at 130 °C

2 W power rating at 70 °C

2 windings) 12.5W

2.0A current rating

2.5 W power rating at 70 °C

20 kHz and 134.2 kHz

20 kHz or 40 kHz.

20 kHz) 6.1 W

2000kHz / 0.29mH / 11.8x3.6x2.5mm

2000kHz / 0.40mH / 11.8x3.6x2.5mm

20kHz / 30mH / 13x11.6x3.45mm

20kHz / 30mH / 13x11.6x4.15mm

20kHz / 30mH / 13x11.6x4.7mm

20kHz / Sensitivity: 16.9mVpp/App/m/ 30.7x30.7x30.2mm

20kHz / Sensitivity: 2.2mVpp/App/m / 16.5x14.8x11.8mm

20kHz / Sensitivity: 2.7mVpp/App/m / 7x7x2.3mm

20kHz / Sensitivity: 20mVpp/App/m / 105x20mm

20kHz / Sensitivity: 250mVpp/nT / 4.2x3.5x3.2 mm

20kHz / Sensitivity: 27mVpp/App/m / 17.4x15.2x13.9 mm

20kHz / Sensitivity: 28.5mVpp/App/m/ 39.5x39.5x38.6mm

20kHz / Sensitivity: 29.9mVpp/App/m/ 30.7x30.7x30.2mm

20kHz / Sensitivity: 3.5mVpp/App/m/ 17.4x15.2x13.9mm

20kHz / Sensitivity: 30mVpp/App/m / 30.7x30.7x30.2mm

20kHz / Sensitivity: 4.5mVpp/App/m / 7x7x2.3mm

20kHz / Sensitivity: 43mVpp/App/m / 15.6x15.6x3.8mm

20kHz / Sensitivity: 4mVpp/App/m / 16.5x14.8x11.8 mm

20kHz / Sensitivity: 54mVpp/App/m / 39.5x39.5x38.6 mm

20kHz / Sensitivity: 67mVpp/App/m / 105x20mm

20kHz / Sensitivity: 7mVpp/App/m / 17.4x15.2x13.9 mm

20kHz / Sensitivity: 9 mVpp/App/m / 9.5x9.5x3.2mm

20kHz / Sensitivity:11mVpp/App/m / 11.6x11.6x3.2mm

20kHz / Sensitivity:15mVpp/App/m / 15.6x15.6x3.8mm

20kHz / Sensitivity:17.5mVpp/App/m / 16.5x14.8x11.8 mm

20kHz / Sensitivity:19mVpp/App/m / 15.6x15.6x3.8mm

20kHz / Sensitivity:20mVpp/App/m / 11.6x11.6x3.2mm

20kHz / Sensitivity:27mVpp/App/m / 11.6x11.6x3.2mm

24/7 Continuous Operation

25 Adc Current

250 °c / 10 min

250 W permanent power at 85 °C

250*76*84 mm (L*W*H)

250°C / 10 min

260mH / 9x1.5x2mm / Sensitivity > 1

270mH / 5.1x2.3x2.6mm / > 1

288 words x 16 bits

288 words x 8 bits

2D1D15-0477J is customizable.

3 coils in one component

3 orthogonal coils in one component

3 outputs +12V (PA / PB / PC) with reinforced insulation (cr >5mm)

3 outputs +3

3 W power rating at 70 °C

3 W power rating at 95 °c

3 W power rating up to 140 °C

3 W power rating up to 145 °C

3 Years Product Warranty

3-phase + neutral CMC using nanocrystalline core

3-phase PFC choke module

3/4 pin contacts available.

30 ppm/K

340mH / 9x1.5x2mm / Sensitivity > 2

350mH / 10.5x1.4x2mm / Sensitivity > 2

384 words x 8 bits

3D Magnetic field sensitive

3D20LW-A-0145J is customizable

3D28LW-A-0200J is customizable

3DC06EM-S-0345J is customizable.

3DC06ISO-0345J is customizable.

3DC09LP-0720J is customizable

3DC11-DR-0491J is customizable.

3DC11-DR-0720J is customizable.

3DC11AOI-05DR-0491J is customizable.

3DC11AOI-05DR-0720j is customizable.

3DC11CAP-0491J is customizable.

3DC11EM-0720J is customizable.

3DC11F-0238J is customizable.

3DC11F-0491J is customizable.

3DC11F-0720J is customizable.

3DC11LP-0238J is customizable.

3DC11LP-0247J is customizable

3DC11LP-0345J is customizable.

3DC11LP-0477J is customizable.

3DC11LP-0491J is customizable

3DC11LP-0720J is customizable

3DC11LP-1000J is customizable.

3DC11LP-A-2000J is customizable.

3DC11LP-AOI-0238J is customizable.

3DC11LP-AOI-0477J is customizable.

3DC11LP-AOI-0720J is customizable.

3DC11LP-AOIC-0238J is customizable.

3DC11LP-AOIC-0477J is customizable.

3DC11LP-AOIC-0720J is customizable.

3DC11LP-AOIF-0238J is customizable.

3DC11LP-AOIF-0477J is customizable.

3DC11LP-AOIF-0720J is customizable.

3DC11LPAOI-A-3000J is customizable.

3DC11LPAOI-C-0720J is customizable.

3DC11LPAOIC-A-3000J is customizable.

3DC11LPAOIC-C-0720J is customizable.

3DC11LPAOIF-A-3000J is customizable.

3DC11LPAOIF-C-0720J is customizable.

3DC11LPCAP-0238J is customizable.

3DC12-0720J is customizable.

3DC12-C-0720J is customizable.

3DC13S-0236J is customizable.

3DC13S-0470J is customizable.

3DC13S-0720J is customizable.

3DC13S-C-0236J is customizable.

3DC13S-C-0470J is customizable.

3DC13S-C-0720J is customizable.

3DC14EM-ULP-0238J is customizable.

3DC14EM-ULP-0450J is customizable.

3DC14EM-ULP-0477J is customizable.

3DC14EMR-ULP-0238J is customizable.

3DC14EMR-ULP-0450J is customizable.

3DC14EMR-ULP-0477J is customizable.

3DC14S-0236J is customizable.

3DC14S-0470J is customizable.

3DC14S-0630J is customizable.

3DC14S-0720J is customizable.

3DC14S-C-0236J is customizable.

3DC14S-C-0470J is customizable.

3DC14S-C-0720J is customizable.

3DC15-0247J is customizable.

3DC15-0345J is customizable.

3DC15-0405J is customizable.

3DC15-0477J is customizable.

3DC15-0491J is customizable.

3DC15-0720J is customizable.

3DC15-1000J is customizable.

3DC15-S-0247J is customizable.

3DC15CAP-0247J is customizable.

3DC15CAP-0491J is customizable.

3DC15CAP-0720J is customizable.

3DC15CAP-1000J is customizable.

3DC15F-0247J is customizable.

3DC15F-0491J is customizable.

3DC15F-0720J is customizable.

3DC15HF-0003K is customizable.

3DC15HF-0006K is customizable.

3DC15HF-0009K is customizable.

3DC15HF-0018K is customizable.

3DCC03-A-0570J is customizable

3DCC08-A-0038J is customizable

3DCC08-A-0550J is customizable

3DCC10-A-0066J is customizable

3DCC10-A-0600J is customizable

3DCC20-A-0030J is customizable

3DCC20-A-0110J is customizable

3DCC28-A-0039J is customizable

3DCC28-A-0150J is customizable

3DCD90-A-0039J is customizable

3DCD90-A-0100J is customizable

3DTX08-A-0060J is customizable

3DTX10-A-0100J is customizable

3DV06-A-S0100J is customizable

3DV06-A-S0340J is customizable

3DV09-A-S0500J is customizable

3DV11AOI-A-2000J is customizable

3DV11AOI-A-3000J is customizable

3DV11AOI-A-S0600J is customizable

3DV15-A-5350J is customizable

3DV15-A-S0600J is customizable

3DV15-A-S0900J is customizable

3DV15-A-S2000J is customizable

3V (PA / PB / PC) with reinforced insulation (cr >5mm)

4-terminal connection

40 A-

40-160VDC

40KHz and 125KHz applications.

40mH / 5.1x2.3x2.6mm / > 0

40mH / 6.6x2.3x1.75mm / Sensitivity 0.80

41-pin WLCSP with 27 GPIO

460mH / 10.5x1.4x2mm / Sensitivity > 3

47-440Hz

47~440Hz

49-pin WLCSP 300um with backside coating (Thin)

49-pin WLCSP with 34 GPIO

4DC15NF-0477J is customizable.

4W power rating up to 150 °C

5 W Dauerleistung

5 W permanent power

5 W power rating at 105 °C

5 W power rating at 70 °C

5 W power rating up to 130 °C

50 J pulse power for 10 ms

50 mW

50 W

500kHz / 0.10mH / 11.8x3.6x2.5mm

500V insulation between core & winding

536 words x 16 bits

536 words x 8 bits

536 words x8 bits

576 words x 8 bits

5Khz @25°C @1Vac.

5Khz @25°C @1Vac. (L+C in series)

5kW full-bridge LLC

5kW half-bridge LLC

5mm / (100uH-500uH)

60 A- and 80 A-energy-meters

6000VDC Isolation

64-pin BGA with 50 GPIO

64Arms in NN): 25 W

66-pin WLCSP with 37 GPIO

768 words x 8 bits

7kW at 240v/1920w at 120v

80 PLUS Bronze

80 PLUS BRONZE Certification

80 PLUS Bronze Efficiency

80 PLUS Gold

80 Plus Gold Efficiency

80-160VDC Wide Input Voltage Range

80PLUS Bronze

80PLUS Gold

80PLUS Platinum

81-pin BGA with 50 GPIO

864 words x 8 bits)

8K 60Hz

8K UHD

90-370VDC

A total 11kW part enclosed in a whole aluminum housing and filled with themal compound.

A total 11kW part enclosed in a whole aluminum housing and filled with thermal compound.

A total 12.5 kW part enclosed in a whole aluminum housing.

A total 23.2kW part enclosed in a whole aluminum housing and filled with thermal compound.

A total 50 kW part enclosed in a whole aluminum housing and filled with thermal compound.

AC/DC and DC/DC main boards in xEV converters

Access control and Tracking devices.

According industry and safety standards: UL94-V0

Active latch design

Active PFC Circuit

Active PFC Within 0.99 Power Factor Correction

ADC: 10-bit

ADC: 12-bit

ADC: 14-bit

Advanced Wi-Fi features: 802.11n - Micro-AP mode - client mode - WPS

AEC-Q200

AEC-Q200 compliant

AEC-Q200 qualification

AEC-Q200 qualification in preparation

AEC-Q200 qualified

AEC-Q200 version available

AECQ-200

AECQ-200 compliant

Allows Automatic Optical Inspection (AOI)

Allows Automatic Optical Inspection.

Also functional to 20kHz and 134kHz.

Also provided in any other inductance value at LF or tighter tolerances.

Aluminum enclosure and covered with high thermal conductivity compound.

AMBIENT TEMPERATURE - 40 to 85 °C

Amorphous core for higher efficiency

and IR-soldering

and vector graphics

and Wearable products.

ANSI/AAMI ES60601-1 Approved with CE Marking

AOI Component

Application

Applications: KES (Keyless entry system)

Applications: Keyless entry system.

Applications: Keyless smart entry system.

Applications: Passive Entry and Remote keyless.

Applications: passive entry applications (PE) or Tire Pressure Monitoring system (TPMS)

Applications: PE or TPMS

Applications: Smart entry system.

Applications: telemetric

Approx weight: 1500g

Approx weight: 1600g

Approx weight: 255g

Approx weight: 4710g

Approx weight: 740g

ARM Cortex M4F 32bit processor and 192KB flash and 24KB RAM

ARM Cortex M4F 32bit processor and 512KB flash and 64KB RAM

ARM® Cortex M33 for Application core / 1MB Flash & 512kB RAM

ARM® Cortex M33 for Network core / 256kB Flash 64kB RAM

ARM® Cortex M4 32bit processor

ARM® Cortex M4 32bit processor and 192KB flash and 24KB RAM

ARM® Cortex M4 32bit processor and 256KB flash and 32KB RAM

ARM® Cortex M4F 32bit processor

ARM® Cortex M4F 32bit processor and 1MB flash and 256KB RAM

ARM® Cortex M4F 32bit processor and 512KB flash and 128KB RAM

Arm® Cortex®-M0 for Bluetooth Low Energy

ARM® TrustZone® Cryptocell 310 cryptographic accelerator

ARM® TrustZone® Cryptocell 312 cryptographic accelerator

atomic watch

Au-plated bond pads (0.1µm)

Audio: Dual Interface PDM for Mono and Stereo Audio Microphones

Audio: Stereo PDM (4x)Low Power Stereo Audio ADC (1x)

Audio: Stereo PDM (4x)LP Analog Microphone with PGA (1x)

Audio: Stereo PDM Interfaces (1x)

Audio: Stereo PDM(1x)

Automatic tape-and-reel packaging is available for automatic vacuum nozzle placement equipment

Automation of Electric Power Distribution

Automation of Electric Power Distribution System and Outdoors Bare Overhead Power Lines.

Automotive EV/PHV AC/DC onboard battery chargers

Automotive TPMS with wake up functions and access control.

Auxiliary 15 Vdc / 5 mA,

Available high inductance version for hearing aids applications.

Available with different inductance values

Availaible with different inductance values

Bandwidth:48Gbps

Based on Qi Wireless charging or customize.

Basic insulation level between winding and core up to 3kV

Best isotropic/size performance

Best size/sensitivity ratio

Best solution when high electrical mechanical performance is needed.

Big metallised pad area Pb free.

Big size Isotropic 3D Cubic magnetic tracking sensor.

Bluetooth® and Japan - FCC - ISED qualified

Bluetooth® Version: 5.0 (2Mbps mode)

Bluetooth® Version: 5.0 (support: 2M / 1M / 125kbps)

Bluetooth® Version: 5.0 (support: 2M / 1M / 500k / 125kbps)

Bluetooth® Version: 5.2 (support 2M / 1M / 500k / 125kbps / AoA / AoD)

Bluetooth® Version: 5.3 (support : 2M / 1M )

Bluetooth® Version: 5.3 (support 2M / 1M / 500k / 125kbps / AoA / AoD)

Both through hole & press-fit available

Brown out protection

BSMI

Built-in Active PFC function (90-264VAC)

Built-in Application Processor - WLAN front end - Flash Memory - Xtal - Power circuits

Cable Diameter: 4.0mm

Cable Diameter: 4.8mm

Calibration/Auto-calibration: yes

Can be used in RFID applications with ISO15693 (vicinity: I-Code)

CAN-FD link with the ECU

caters to different applications

CB 60950

CCC

CCM Flyback

CE and CCC certification or declaration

CE and CCC certification or declaration requirement

CE Marking

cellular phones

Certified Medical Safety IEC 60601-1

Channel Number : 1 to 11 channel (11bgn)

Chassis and DIN-Rail Mounting Version

Chokes for CCM PFC operation

Class-I design 350W @ 12V

Cleaning-washable Process Available (option)

Cleaning-washable Process Available(option)

Clearance greater than 2.5mm between outputs/core

Compact & rugged design for superior connection.

Compact DIP-16 Package

Compact equipment: BNC connector integrated in the coupler.

Compact equipment: IP67 waterproof cable assembly integrated in the coupler (other connections available under request)

Compact equipment: Waterproof IP67 cable assembly - JST connector

Compact SIP-8 Package

Compact Size of 2" X 1" Package

Compact SMD Package

Compatibility with WPC Qi protocol

Compatibility with Z2 - Z3

Compatible with 4Gbps automotive serializer

Compatible with WPC Qi protocol.

Compliant to Energy Star Specification and ErP Directive 2009/125/EC

Compliant with EN62368

Compliant with RoHS 2011/65/EU directive

Complies with FCC

Complies with requirements of FCC

Component

Component temperature range -40°C to +130°C

Conducted EMI EN 55011 Class A Approved

Conducted EMI EN 55011/22 Class A Approved

Conducted EMI EN 55032 Class A

Conducted EMI EN 55032 Class A Approved

Conducted EMI EN 55032/11 Class A Approved

Connectivity: Bluetooth Low Energy 5

Connectivity: Bluetooth Low Energy 5.1

Connector located outside assembly Antenna LF

Connector located outside assembly Antenna LF SWITCH

Connector located outside assembly housing plastic base.

Connector Non Waterproof IP52 located outside assembly housing plastic base.

Connector Waterproof located outside assembly housing plastic base.

Constant current up to 10 A (10 mOhm)

constant current up to 10 A (10 mohm) Small size (1206)

Constant current up to 100 A (0.5 mOhm)

Constant current up to 11 A (8mOhm)

Constant current up to 14A (10 mOhm)

Constant current up to 16 A (10 mOhm)

Constant current up to 20 A (5 mOhm) Standard pad size (2010)

Constant current up to 200 A

Constant current up to 220 A

Constant current up to 24A (5 mOhm)

Constant current up to 25 A (5 mOhm)

constant current up to 25 A (5 mohm) Standard pad size (2512)

Constant current up to 26 A (3 mOhm)

Constant current up to 30 A (1 mOhm)

constant current up to 32 A (2 mohm)

Constant current up to 32 A (5 mOhm)

Constant current up to 35 A (4mOhm)

Constant current up to 35 A (DC-current)

Constant current up to 41 A (2 mOhm)

Constant current up to 41 A (2 mOhm) Small size (1206)

Constant current up to 50 A (1.5 mOhm) Standard pad size (2512)

Constant current up to 55 A (1 mOhm)

Constant current up to 70 A

Constant current up to 70 A (2 mOhm)

Constant current up to 90 A (0.5 mOhm)

Contact lock structure

Contains 40

Continuous current 32 Arms

Continuous current load up to 100 A (0.3 mOhm)

Continuous current load up to 130 A (0.3 mOhm)

Continuous current load up to 245 A (0.2 mOhm)

Continuous current load up to 250 A

Continuous current load up to 315 A (0.1 mOhm)

Continuous Mode Flyback

Cooling

Cooling by air flow (2m/s)

copper connectors

COPPER LOSS (@25Adc

Copper losses (@32Arms in Np1 & Np2

Copper losses (DC) 1

Copper losses (DC) 150 mW

Copper losses (DC) 210 mW

Copper losses (DC) 520 mW > Core losses 550 mW > Total losses 1

Copper losses (I = 32Arms) 14.5 w

Copper losses @100 °C (32 Arms) 16.6 W

Copper losses: 14 @100°C (@180Adc)

Copper losses: 15W @100°C (@180Adc)

Copper losses: 15W @100°C (@230Adc)

Core losses (I = 32Arms) 15.5 W

Core losses (Vin=26V/250kHz/100°C) 0.1 W

Core losses @100 °C (18.6 App

Core losses 0

Core losses 300 mW

Core losses 50 mW

Core made of high permeability MnZn ferrite (Tc > 130°C)

Cost efficient

Creepage & Clearance Distance meet 8mm

Creepage distance > 10mm (CTI-I > 600V)

Creepage distance > 8mm

CRPS 2.0- compliant

Crystal (XT) Oscillator: yes

CUL

Current repartition: 43Arms@50Hz sinus + triangular ripple of 6Arms@20-40kHz

CURRENT RES. INDUCTOR: 24 Arms (36Apk)"

CURRENT RES. INDUCTOR: 30 Apk

Current: 25A

Current: 32-64A

Current: 32-64Arms

Current: 43A Inductance: 200µH

Custom inductance value under demand.

Customized versions possible

Customized versions possible 100m

Customized versions possible 10m

Customized versions possible 15m

Customized versions possible 1m

Customized versions possible 20m

Customized versions possible 25m

Customized versions possible 2m

Customized versions possible 30m

Customized versions possible 35m

Customized versions possible 3m

Customized versions possible 40m

Customized versions possible 45m

Customized versions possible 50m

Customized versions possible 5m

Customized versions possible 60m

Customized versions possible 70m

Customized versions possible 7m

Customized versions possible 80m

Customized versions possible 90m

DC to DC Design for Better System Compatiblity

DC-Copper losses (Vin=10V/100°C) 0.5 W

DCM Flyback,

DCR wdg: 0.3mΩ MAX @25°C

DCR wdg: 0.45mΩ MAX @25°C

DCR wdg: 1.4mΩ MAX @25°C

DCR wdg: 1.7 mΩ TYP (2.2 mΩ MAX)

DCR wdg: 10mΩ MAX @25°C

DCR wdg: 12mΩ MAX @25°C

DCR wdg: 14mΩ MAX @25°C

DCR wdg: 15mΩ MAX @25°C

DCR wdg: 3.5mΩ MAX @25°C

DCR wdg: 30mΩ MAX @25°C

DCR wdg: 35mOhms MAX @25°C

DCR wdg: 37mΩ MAX @25°C

DCR wdg: 42mΩ MAX @25°C

DCR wdg: 5.5mΩ MAX @25°C

DCR wdg: 6 mΩ MAX @25°C

DCR wdg: 6.6mΩ MAX @25°C

DCR wdg: 60mΩ MAX @25°C

DCR wdg: 6mΩ MAX @25°C

DCR wdg: 8.5mΩ MAX @25°C

DCR wdg: 9.2mΩ MAX @25°C

DCR wdg:3.2/5.5mΩ MAX @25°C

Dedicated to 48V battery systems

Degree of protection IP67.

Delivering speeds up to 10 Gbps.

Design based on AEC-Q200

Design based on AEC-Q200D

Designed for 125KHz

Designed to meet IEC 60950-1 & IEC 62368-1

Designed-in Conducted EMI meets EN 55032 Class A

Designs at lower frequencies

Designs at lower frequencies like 20 kHz and 40 kHz show a very good electrical performance as well.

Designs at lower frequencies show a very good electrical performance as well.

Designs can be fully customized.

Device Connector: MicroB with screw

Dimensions 3 x 5 x 1.34 inch

Direct and indirect mating

Direct PCB attachment

Display: SPI 3-wire/4-wire

Display: SPI 3-wire/4-wire Dual/QuadSPI

Display: SPI 3-wire/4-wire Dual/QuadSPI MIPI DSI x2 4-layer Display Controller

Display: SPI 3-wire/4-wire Dual/QuadSPIMIPI DSI x2 4-layer Display Controller

Display: SPI 3-wire/4-wireDual/QuadSPI

dithering

DMA

Double Contact structure ensures high wear resistance and high contact reliability.

Drop test: more than 500 times x 1 meter.

Dry & Damp Heat Test IEC/EN 60068-2-1

DSCs

Dual active bridge Transformer 7.2kW

Duty 47%

Duty 50%

Duty cycle 80% MAX

Duty cycle 85% MAX

Dynamic Bending Radius: 50mm

Easy assembly.

Easy FPC insertion and high retention force.

Easy pin insertion onto PCB

Easy SMD assembly.

Eco Design

Electric bicycle

Electrical insulation

EMC

EMC Immunity EN 61000-4-2

EMC Immunity EN61000-4-2

EMC Standard: EN55022 / EN55024 Class B

EMC Standard: EN55024 Class B / EN55032

EMC Standard: EN55032 / EN55024 Class B

EMC4.0 compliant: no

EMC4.0 compliant: yes

EMI Emission EN 55011 Class A Approved

EMI Emission EN 55011/32 Class B Approved

EMI Emission EN 55032 Class A Approved

EMI Emission EN 55032/11 Class A Approved

EMI Emission EN 55032/14-1 Class B Approved

EMI Emission EN55014-1/55032 Class B Approved

EMI Emission EN55032 Class A Approved

EMI Emission EN55032 Class B Approved

EMS Immunity EN 61000-4-2

EMS Immunity EN61000-4-2

Endurance: 105°C : 2 000 hours up to 5 000 hours

Endurance: 105°C 2 000 hours

Endurance: 150°C ▪ 1 000 hours

Epoxy coated. High reliability with pick & place machines warranted.

Est. Losses 13.5W

Estimated Losses (100°C)

Estimated total loses at 100°c

Estimated Total Losses (@115kHz

Estimated Total Losses (@132kHz

ESTIMATED TOTAL LOSSES (@165kHz

Estimated Total Losses:

etc.

ETmax product of 200Vµs

ETSI EN 300 328 V2.2.2 conducted test report available

ETSI EN 300 328 V2.2.2 conducted test report planned

Excellent dissipation of impact energy.

Excellent Efficiency up to 89%

Excellent Efficiency up to 90%

Excellent Efficiency up to 91.5%

Excellent Efficiency up to 91%

Excellent Efficiency up to 92%

Excellent Efficiency up to 96%

Excellent Efficiency up to 97%

Excellent long-term stability

Excellent redundant PSU efficiency

Extended frequency 250-500KHz

External housing shape H-bridge (Integrate connector).

External Interrupts: yes

Extremely good long-term stability

Extremely low resistance values from 0.5 mOhm

Fast-on ground tab

FCC

FFP and Short Circuit Protection

Filtering Chokee

Fire Protection Test EN 45545-2 Approved

Fixation between modules (puzzle basics) by plastic fasteners

Fixation to PCB by faston connexions

Flex Form Factor with 100W Output Power

Flexible magnetic core-shape.

Footprint : SMD 18 x 14.5mm MAX

For RFID applications. 125kHz / 3.45mH / 7x7x2.3mm.

Forward & D2D To Offer High Performance and Efficiency

Forward operation (demagnetizing winding included)

Four terminal-configuration

FPC / FFC mating state can be confirmed.

Freq: 2-40MHz / Rate Current: 300A

Freq: 30-500KHz / Rated Current: 300A

Freq: 30-600KHz / Rated Current:300A

Frequency 100kHz Inductance: 36µH

Frequency 50 khz

Frequency range 100-250kHz

Frequency range 70-200kHz

Frequency range: 50-100kHz

Frequency: 20kHz Current: 32A Inductance: 120µH

Frequency: 2402 to 2480 MHz

Frequency: 44-152KHz Turn-Ratio: 0.641 Inductance: 65µH

Front fastened type available.

FSP250-701UH

FSP300-60FAG

FSP300-70PFL

FSP400-702UJ

FSP500-80EVMR

Fsw(switching Freq): 67/50

Full Range Input 90-264 VAC

Fully aluminum base encapsulated and filled thermal compound for heat disipation.

Fully Encapsulated Module for PCB Mounting

Fully Encapsulated Plastic Case for Chassis and DIN-Rail Mounting Version

Fully Encapsulated Plastic Case for PCB

Fully Encapsulated Plastic Case for PCB and Chassis Mounting Version

Fully Encapsulated Plastic Case for PCB Mounting

Fully isolated terminals

Fully Regulated Output

Fully Regulated Output Voltage

Functional insulation at 500V

Geeignet fr Lttemperaturen bis 280 °C / 30 sek oder 250 °C / 5 min (Kupferseite auf Substrat)

Global Safety Standard Approvals UL

Gold plating for superior corrosion resistance

Good cost/perfomance ratio.

Good cost/performance ratio.

Good long-term stability

Good mechanical perfomace.

Good mechanical performance

Good mechanical/drop test perfomance

Good mechanical/drop test performance

Good perfomance in thermal shock test.

Good performance in thermal shock.

Good sensitivity in small volume

Good thermal conductivity through high thermal conductivity plastic

GPIO bus control function

Graphics: 2D/2.5D GPU with anti-aliasing

Graphics: 2D/2.5D GPU with anti-aliasing and dithering

Ground pad terminal

H-CMC Choke

handheld mobile terminals

HDMI: 48Gbps

Heavy copper connectors

Height : 7.8mm MAX

Height: 8.5mm.max

High accuracy inductance and/or resonance frequency.

High accuracy outputs position

High altitude 5000 meters operation

High axis symmetry (X

High current resistor for calibration

High current solution made with high permeability.

High drop test resistance (up to 500 times 1 m) due to a maximized pin area

High drop test resistance.

High Efficiency Certified 80 PLUS

High Efficiency Meet 80 PLUS BRONZE

High Efficiency Meet 80 PLUS GOLD

High Efficiency up to 84%

High Efficiency up to 85%

High Efficiency up to 86%

High Efficiency up to 87%

High Efficiency up to 88%

High Efficiency up to 89%

High electrically insulated.

High frequency attenuation value in the MHz range

High I/O Isolation 1000VDC

High inductance sensitivity.

High insulation winding to core

High mechanical performance.

High mechanical robustness.

High Operating Temperature -40 to 155 °C.

High Operating temperature range -40 to +155°C

High performance 2-3kW SMPS

High performance CMC using nanocrystalline core

High performance NiZn ferrite core material.

High permeability MnZn ferrite core (Tc > 130°C)

High Power Density in SIP-9 Package

High pulse power rating

High Quality Solutions

High reading distance depending of the size ferrite core.

High Reliability

High saturation powder ring core and solid wire technology

High sensitivity

High sensitivity (>72mV/A/m) and isotropic performance

High sensitivity (>80mV/A/m)

High sensitivity (>90mV/A/m [X

High sensitivity (50mV/A/m)

High sensitivity (60mV/A/m)

High sensitivity (75mV/A/m)

High sensitivity for 20KHz

High sensitivity in the smallest volume.

High sensitivity values achieved with very good thermal performance.

High sensitivity values achieved with very good.

High sensitivity values.

High stability in temperature

High stability in temperature (-40 °C to 125 °C).

High stability in temperature (-40 °C to 85 °C)

High stability in temperature (-40°C to 125°C).

High stability in temperature (-40°C to 85°C)

High stability in temperature (-40°C up to 85°C).

High stability in temperature: (-40°C to 100°C).

High stabilityintemperature(-40°Cupto+85°C).

High voltage and low impedance

High voltage to Low voltage.

High X/Y/Z symmetry and repeatability.

Higher impact absorption and mechanical reduction preventive.

Highly customizable solution

Host Connector: TYPE A

Host Connector: TYPE A with screw

Hot Swap (module) without system shut-down

Hot Swappable Module Design

Housings: Black metal

Housings: Black plastic injection

HPMC-001 is customizable

HPMC-002 is customizable.

HVHV LLC 3x3.5KW / Turn-ratio: 14:15 / Inductance: Lm115UH Lr20UH

Hybrid AOC USB3.1 cable

HYBRID CONDUCTIVE POLYMER THT type

I/O Isolation 1000 VDC

I/O Isolation 1500 VDC

I/O Isolation 1500 VDC (opt. 3000VDC)

I/O Isolation 1500VDC

I/O Isolation 1600 VDC

I/O Isolation 2000VAC with Reinforced Insulation

I/O Isolation 2500 VDC

I/O Isolation 3000 VDC

I/O Isolation 3000VAC with Reinforced Insulation

I/O Isolation 3000VDC

I/O Isolation 4000VAC with Reinforced Insulation

I/O Isolation 4200VAC with Reinforced Insulation

I/O Isolation 5000VAC with Reinforced Insulation

I/O-Isolation Voltage 1500 VDC

I/O: I2C Master (6x)I2C/SPI Slave

I/O: I2C/SPI Master (2x)I2C/SPI Slave

I/O: I2C/SPI Master (6x)I2C/SPI Slave

I/O: I2C/SPI Master (7x)I2C/SPI SlaveSDIO v3.0/eMMC (1x)

I/O: I2C/SPI Master (7x)I2C/SPI SlaveUSB FS/HSSDIO v3.0/eMMC (1x)

I/O: I2C/SPI Master (8x)I2C/SPI SlaveSDIO v3.0/eMMC (1x)

I/O: I2C/SPI Master (8x)I2C/SPI SlaveUSB FS/HSSDIO v3.0/eMMC (1x)

I2C

I2S: I2S Master/Slave (1x) full-duplex

I2S: I2S Master/Slave (2x) full-duplex with ASRC

I2S: I2S Master/Slave full-duplex

I2S: I2S Slave for PDMAudio Pass-through

Ideal for mounting on DCB/IMS substrate

Ideal suited for mounting on DBc / IMS substrate

IEC 62368 & IEC 60950

IEC/EN 60335-1 & CE Marking CE Marking

IEC/EN 62368 Safety Ready

IEEE802.11b/g/n conformity.

Improved sensitivity for X and Y axes. Q factor improved for Z axis.

IMS Substrat Ideal suited for mounting on DBC / IMS substrate

Include basic Android app

Independent from temperature because of lowest

Independent spring with two-point contact design for high contact reliability.

Inductance range: 1-4mH

Inductance range: 2-10mH

Inductance range: 2-20mH

Inductance range: 2-50mH

Inductance range: 80µH to 500µH

Inductance value of reference: 200uH at 43A

Industrial

Industrial conveying equipment

Industrial SMD Package

Industrial Standard 1" x 1" Package

Industrial Standard 2" X 1" Package

Industrial Standard 2"×1" Package

Industrial Standard DIP-16 Package

Industrial Standard DIP-24 Package

Industrial Standard DIP-8 Package

Industrial Standard Quarter Brick Package

Industrial Standard SIP-3 Package

Industrial Standard SIP-4 Package

Industrial Standard SIP-6 Package

Industrial Standard SIP-7 Package

Industrial Standard SIP-8 Package

Industrial Standard SMD Package

Industry qualified

Industry standard connector

Industry Standard DIP-16 Package

Industry Standard SIP-8 Package

Input <1255V / <16.8Arms

Input 400V

Input 5

Input 850-400V / <16.3Arms

Input from USB3.0（Vendor Class) or HDMI

Input Prim: 10-26V

Input Prim: 100-400V/0.6Arms/1.4Apk

Input Prim: 9-16V,

INPUT Primary Voltage: 280 Vdc to 460 Vdc,

INPUT Primary Voltage: 580 Vdc to 750 Vdc,

INPUT VOLTAGE 240-410 Vdc

Input Voltage 300 to 400 Vdc,

Input voltage 5Vdc TYP

Insert Molding Technology

Insulation 3kV

Insulation according to EN 60664-1

Integrated high performance ceramic chip antenna

Integrated high performance pattern antenna

Integrated leakage.

Integrated powerful performance pattern antenna

Integrated System Clock

Integrated System Clock Clock

Integrated System Clock/Sleep Clock

Integrated System/Sleep Clock

Intel PSDG Flex ATX 12V V1.22 version

Intel PSDG SFX 12V V3.42 version

Intel/AMD Latest Platform Ready

Interface : UART - SPI

Interface :Dual &nQuad SPI

Interface :I2C

Interface :Parallel

Interface :SPI

Interface: 3/4-wire SPI up to 2 MHz

Interface: I2C up to 400 kHz

Interface: NFC-A - SPI - UART - I2C - I2S - PDM and 12bit ADC

Interface: SPI - UART - I2C - I2S - PDM and 12bit ADC

Interface: SPI - UART - I2C - I2S - PDM and 12bit ADC - NFC-A

Interface: SPI - UART - I2C - PDM and 12bit ADC

Interface: UART

Interface: USB

Interface: USB - NFC-A - SPI - UART - I2C - I2S - PDM and 12bit ADC

Interface: USB - SPI - UART - ADC

Interface: USB - SPI - UART - I2C - I2S - PDM and 12bit ADC

Interface: USB - SPI - UART - I2C - I2S - PDM and 12bit ADC - NFC-A

Interface: USB - SPI - UART and I2C

Interfaces: HDMI type A plug

INTERNAL 4 cm fan

INTERNAL 4 cm fan 100% burn-in under high ambient temperature(50°C)

Internal 4 cm fan at output side for better acoustic quality

Internal 4 cm fan with IEC 62368 standard vents opening

Internal 7 cm fan with IEC 62368 standard vents opening

Internal 8 cm fan at output side for better acoustic quality

Internal 8 cm fan with IEC 62368 standard vents opening

Interoperability with WPT1-WPT2

Ip (A) RMS: 35

IP56 grade waterpro.

IP56 grade Waterproof.

IPC/JEDEC J-STD-020D.1

Ippmax until 5App

Irated: 12Adc

Irated: 16 A

Irated: 16.5A

Irated: 16A

Irated: 16Adc

Irated: 16Arms

Irated: 24 A

Irated: 36Adc

Irated: 3x16+48Arms

Irated: 8Arms + 5App @90kHz

Irated: 8Arms + 8App @100kHz

Irms(A) MAX: 17/25/2x25

Iron losses: 5W with MAX 14App ripple of current @200kHz

ISO 14443A&B (proximity: MIFARE) interface

ISO 18092 and Felica.

ISO14443B

ISO15693 and FeliCa™

Isotropic version available.

its also suitable for other applications working at lower frequencies.

Its size is excellent for plastic moulded inmobilizer transponders.

Japan - FCC and ISED qualified CE conducted test report available

Just insert the FPC / FFC without opening the lock lever before inserting.

Keyless Go and Keyless entry systems.

Keyless Go and RTPMS

Keyless Go Systems and RTPMS.

KGEA-DH-NFCTS is customizable

KHz

L (µH): 9.5-10.5

L value: 10 mH TYP @10kHz

L value: 1000 µH MIN @140kHz

L value: 1000µH

L value: 120µH/ Current: 32A/ Frequency: 50kHz

L value: 2.6 mH TYP (1.7 - 3.6 mH)

L value: 21 mH TYP @10kHz

L value: 25 mH TYP

L value: 2x 0.9mH @10kHz

L value: 2x 10mH @10kHz

L value: 2x 1mH @10kHz

L value: 2x 25mH @10kHz

L value: 2x 2mH @10kHz

L value: 2x 4mH @10kHz

L value: 4x 4.3mH @10kHz

L value: 620µH / Turn Ratio: 8:4

L value: Lmag = Lp = 130µH

L value: Lmag = Lp = 36µH

L(µH): 42.1 - 43.7

Labelled to allow P&P operarions

Lenght and Cross Sectional Area optimized to achive the maximum sesitivity in the coil axis.

Length: 1m

light weight

Light Weight (30gr)

Light Weight (65gr)

line input fuse protection

Lk = 5uH Turn ratio = 0.8

Lk = 6uH Turn ratio = 0

Load (current) sharing in normal operation

Lock and Unlock touch sensors

Long range and high sensitivity solution.

Long Range Antenna with Housing - 265x21x11

Long Range Flexible Antenna - 350.50x32x12mm / 104uH

Long Range Flexible Antenna - 350.50x32x12mm / 161uH

Long Range Flexible Antenna - 350.50x32x12mm / 240uH

Long Range Flexible Antenna - 554.20x32x26mm / 100uH

Long reading distances and average current 2-4App.

Low Cost

Low ESR and high ripple current

Low I/O Leakage Current < 2μA

Low I/O Leakage Current < 5µA

Low inductance in Sensitivity.

Low inductance sensitivity.

Low inductance value

low Inductanve

Low insertion losses 12dB±2dB (@100- 250kHz) ; 5dB±2dB (@250-600kHz).

Low Isolation Capacitance

Low Leakage Current

Low leakage inductance value.

Low No Load Power Consumption

Low No Load Power Consumption < 100mW

Low No Load Power Consumption < 150mW

Low Power

Low profile

Low profile emitter antenna.

Low profile size.

Low profile: 8.5mm.max

Low resistance values from 1 mOhm

Low Ripple & Noise

Low ripple and noise

Low self-heating

Low tolerances in the resonance frequency LC.

low-power applications

Low-profile copper frames technology.

Lp 150uH Lr = 25uH

Lp 160uH Lr = 13uH

Ls/Ls ( 25°C 85°C): 0.5% max.

Ls/Ls (-40°C 25°C): -2% max.

Lvalue : 400-800µH

Lvalue : 70-150µH

Lvalue : 90-170µH

Lvalue: 15µH / Freq.: 2-30MHz / Turn-ratio: 1:1

Lvalue: 15µH / Freq.: 2-30MHz / Turn-ratio: 1:1:1

Lvalue: 1µH / Irated: 180-200Adc

Lvalue: 1µH > 0.9µH @200Adc / Irated: 180Adc+35App @200kHz

Lvalue: 2.6µH > 1.5µH @230Adc / Irated: 230Adc+14App @200kHz

Lvalue: 250µH > 120µH @24Apk

Lvalue: 25uH / Power: 1.5W / 100 kHz 510uHH /Turn-ratio: 1:1

Lvalue: 25µH / Power: 14W 250Hz / Turn-ratio: 12:10:9:9

Lvalue: 25µH / Power: 3.4W 84kHz / Turn-ratio: 10:10:20:7

Lvalue: 260µH > 90µH @15Apk

Lvalue: 430µH

Lvalue: 500mH Typ / Power: 40W 80KHZ / Turn-ratio: 32:5:5:5

Lvalue: 500µH > 175µH @15Apk

Lvalue: 510uHH / Power: 24W/100KHZ / Turn-ratio: 63:8:8:5

Lvalue: 5mH

Lvalue: 645uH / Power: 50W 130Hz / Turn-ratio: 32:3:2+4

Lvalue: 90µH

Lvalue: Lmag = 12µH / Power: 5W 100KHZ / Turn-ratio: 7:5:7:5:5:5

Lvalue: Lmag = 15uH / Turn-ratio: 2:1:1:0.4:1

Lvalue: Lmag = 17.5 µH/ Power: 10 W / Turn-ratio: 2:1:1:1:1:1

Lvalue: Lmag = 18.5µH

Lvalue: Lmag = 2.25mH

Lvalue: Lmag = 56 µH / Turn-ratio: 24 : 9 : 15

Lvalue: Lmag = 56µH / Turn-ratio: 24 : 9 : 15

Lvalue: Lmag = 5µH / Power: 16W 100KHZ / Turn-ratio: 5:9:9:9:9

Lvalue: Lmag = 6.3µH / Power: 5W 100KHZ / Turn-ratio: 10:3:7+4:10+4

Lvalue: Lmag>90uH

Lvalue: Lmag>915uH

Lvalue: Lp = 36µH @0-5Apk

Lvalue: Lp14.4uH / Power: 1.75W 115±15kHz / Turn-ratio: 8:5:14:14

Lvalue: Lr = 22µH @0-29Apk

Lvalue: Lr = 6.3µH @0-30Apk

Lvalue: Lzvs = 14µH @0-14Apk

Lvalue:2.7 mH Typ / Power: 10W 60KHZ / Turn-ratio: 1:4.76:7.14

magnetic flexible-core and coil integrated in a single pad.

Mains Isolated flyback transformer for industrial/white goods use

Marine

Massive copper terminals

MAX current 700mA PRIM / 140mA SEC

MAX DUTY CYCLE 48.5%

Max operating voltage: 870 V

Max Volt-Time product: 13Vµs

Max Volt-Time product: 150Vµs

Max Volt-Time product: 16Vµs

Max Volt-Time product: 200Vµs

Max Volt-Time product: 20Vµs

Max Volt-Time product: 2x11Vµs

Max Voltage: 440 Vpk

Max Voltage: 440Vpk

Max. current limit 387 A

Max. Current to Devi

Max. Current to Device: 600mA

Max. Current to Device: 900mA

Max. Datarate: 5Gbps

Max. Operating Temperature: 125°C

Max. Operating Temperature: 85°C

Max. permanent current: 81 A

Max. solder temperature up to 280 °C / 30 sec or 250 °C / 5 min

Max. solder temperature up to 350 °C / 30 sec

Max. solder temperature up to 350 °c / 30 sec or

Max. solder temperature up to 350°C / 20 min.

Maximum current 150mA

Mechanical Drop & Vibration compliant.

Mechanical performance.

Medical and industrial applications

Medical EMC Standard with 4th Edition of EMI EN 55011 & EMS EN 60601-1-2 Approved

Medical EMC Standard with 4th Edition of EMI EN 55011 and EMS EN 60601-1-2 Approved

Medical Safety with 1xMOPP & 2xMOOP per 3rd Edition of IEC/EN 60601-1 & ANSI/AAMI ES60601-1 Approved

Medical Safety with 2xMOPP per 3rd Edition of IEC/EN 60601-1

Medical Safety with 2xMOPP per 3rd Edition of IEC/EN 60601-1 & ANSI/AAMI ES 60601-1 Approved

Medical Safety with 2xMOPP per 3rd Edition of IEC/EN 60601-1 & ANSI/AAMI ES60601-1 Approved

Medical Safety with 2xMOPP per 3rd Edition of IEC/EN 60601-1 & ANSI/AAMI ES60601-1 Approved with CE Marking ANSI/AAMI ES60601-1 Approved with CE Marking

Medium range and high sensitivity solution.

Medium size Isotropic 3D Cubic magnetic tracking sensor.

Meet (EU) 2019/1782

Meet Code of Conduct Version 5 Tier 2

Meet Code of Conduct Version 5 Tier I

Meet Code of Conduct Version 5 Tier II

Meet Code of Conduct Vervion 5 Tier II

Meet EN62368

Meet Energy Efficiency DOE Level VI

Meet Energy Star EPS2.0/ ErP Lot 7

Meet High Altitude 5

Meet IEC 62368

Meet IEC 62368 & 60950

Meet IEC 62368 & IEC 60950

meet slim equipment requirements

Meets your needs for a wide range of applications

Memory conf.: 1

Memory conf.: 12 Mbits 1

Memory conf.: 131

Memory conf.: 16

Memory conf.: 2

Memory conf.: 262

Memory conf.: 32

Memory conf.: 512 words x 8 bits

Memory conf.: 524

Memory conf.: 65

Memory conf.: 8

Memory conf.: 8 Mbits 1

Memory size: 128Kb

Memory size: 12Mb

Memory size: 16Kb

Memory size: 1Mb

Memory size: 256Kb

Memory size: 2Mb

Memory size: 4Kb

Memory size: 4Mb

Memory size: 512Kb

Memory size: 64Kb

Memory size: 8Kb

Memory size: 8Mb

meters do not require any recalibration

Micro 3D motion tracking antenna for as VR/AR

Middle Antenna - 67x45.66x16.5mm / 500uH

Middle Range Antenna - 125.05x16.1x41mm / 500uH

Middle Range Antenna - 168.10x15.4x12.9mm / 162uH

Middle Range Antenna - 168.10x15.4x12.9mm / 175uH

Middle Range Emitter Antenna - 145x26x12mm / 0.192mH

Middle Range Emitter Antenna - 145x26x12mm / 108uH

Middle Range Emitter Antenna - 145x26x12mm / 161uH

Middle Range Emitter Antenna - 145x26x12mm / 345uH

Middle Range Emitter Antenna - 145x26x12mm / 426uH

Middle Range Emitter Antenna - 145x26x12mm / 500uH

Middle Range Emitter Antenna - 195x20x23mm / 240uH

Mini Redundant Power Supply with 700W Output and PS2 Form Factor (W&H) 150*86*190mm (W*H*L).

MIPI CSI-2 supports up to 1Gbps / lane

MLPC - MULTILAYER CONDUCTIVE POLYMER

More electrical safety: High insulation > 24 kV

More electrical safety.

Mounting method: SMT (Taped & Reeled)

Mounting on a metal frame for direct mechanical integration in the application by screwing

Mounting onto water-plate heatsinks

Mounting: Reflow-

Mounting: Reflow- and IR-soldering

Mounting: Reflow- and IR-soldering/vacuum soldering

Mounting: reflow-soldering

Mounting: Screwed on terminals of kWh-meter

MSPI: Dual/Quad/Octal-SPI Master (2x)QSPI/OSPI/HexSPI (KXR package only)96 MHz SDR48 MHz DDR

MSPI: Dual/Quad/Octal-SPI Master (2x)QSPI/OSPI/HexSPI 96 MHz SDR48 MHz DDR

MSPI: Dual/Quad/Octal-SPI Master (2x)QSPI/OSPI/HexSPI96 MHz SDR48 MHz DDR

MSPI: Dual/Quad/Octal-SPI Master (3x)48 MHz SDRISO7816 Master

MSPI: Dual/Quad/Octal-SPI Master48 MHz SDRISO7816 Master

MTBF > 100K hours at 25°C

MTBF > 600

MTBF: a min. predicted 100K hours at 25°C

MTBF:100K hours at 25°C

Multi outputs with reinforced insulation (cr >5mm)

Multi-Inputs Selection (AC 90~264Vac) /HVDC (180~310Vdc)

Multiple frequencies available (typ 60kHz

Multiple mechanical keying

National Safety Regulations Certification: CB 62368

New Safety Norm 62368-compliant

NFC reader compliant with ISO14443A

NFC-A

No Load Input Power 300mW max.

No load power consumption less than 0.5W

No Min. Load Requirement

No Min. Load Requirement & Low no-load power consumption

No Min. Load Requiremnt

No Tin Whisker Problem

No voltage derating

Number of GP Outputs: 3

Number of GP Outputs: 4

NVM: 1MB Flash

NVM: 2MB Flash

NVM: 2MB MRAM

NVM: 512KB Flash

OBC with communication with the charging station

OCP

OCP and SCP circuit protection

OCP and SCP Protection

One Action Lock improves workability.

Operating Altitude 5

Operating altitude 5000 meters

Operating altitude complies with 5Km certification

Operating Ambient Temp. Range -25℃ to +60℃

Operating Ambient Temp. Range -25°C to +70°C

Operating Ambient Temp. Range -25℃ to +80℃

Operating Ambient Temp. Range -25℃ to +85℃

Operating Ambient Temp. Range -40℃ to +70℃

Operating Ambient Temp. Range -40℃ to +77.5℃

Operating Ambient Temp. Range -40℃ to +80℃

Operating Ambient Temp. Range -40℃ to +85℃

Operating Ambient Temp. Range -40℃ to +87℃

Operating Ambient Temp. Range -40℃ to +88.5℃

Operating Ambient Temp. Range -40℃ to +88℃

Operating Ambient Temp. Range -40℃ to +90.5℃

Operating Ambient Temp. Range -40℃ to +90℃

Operating Ambient Temp. Range -40℃ to +92.5℃

Operating Ambient Temp. Range -40℃ to +92℃

Operating Ambient Temp. Range -40℃ to +94.5℃

Operating Ambient Temp. Range -40℃ to +95℃

Operating Ambient Temp. Range -40℃ to +96℃

Operating Ambient Temp. Range -40℃to +80℃

Operating Ambient Temp. Range-40℃ to +75℃

Operating ambient temperature: -40°C to +150°C

Operating Baseplate Temp. Range -40℃ to +105℃

Operating freq. :-

Operating freq. :108MHz

Operating freq. :10MHz

Operating freq. :15MHzn

Operating freq. :1MHz

Operating freq. :20MHz

Operating freq. :3.4MHz

Operating freq. :30MHzn

Operating freq. :33MHz

Operating freq. :400KHz

Operating freq. :40MHz

Operating freq. :50MHz

Operating Frequency @114

Operating Frequency @134

Operating Frequency up to 100kHz

Operating Temp. Range -40℃ to +85℃

Operating temperature - 40 to 150 °C

Operating temperature -25/+125°C

OPERATING TEMPERATURE -30°C to 110°C

Operating temperature -40 to 150°C

Operating temperature -40/+125°C with cooling.

Operating temperature -40/+125°C,

Operating Temperature -40°C to +130°C

Operating temperature -40°C to +150°C

Operating temperature -50/+85°C,

Operating Temperature range: -40 to 105 deg-C

Operating temperature: -40 °C to 85 °C

Operating Temperature: -40°C to 85°C

Operating voltage 120/240 vdc

Operating Voltage: 1.5-3.6 V

Operation temperature (-40°C to 85 °C)

Operation:

operative range (-40°C -> 125°C)

Optimized size for high power density vs. freq. attenuation

Optimized size for high power density vs. good attenuation

Optimized size for higher power density

Options with protective foam against shocks also available

or 10^10 at 95℃

Ordering : 2.49 mm x 2.90 mm

Ordering : 2.5 mm x 2.5 mm

Ordering : 3.25 mm x 3.37 mm

Ordering : 4.5 mm x 4.5 mm

Ordering : 4.7 mm x 4.7 mm

Ordering : 5 mm x 5 mm

Ordering : 5.3 mm x 4.3 mm x 0.8 mm

Ordering : Box

Ordering Information: AM0805AQ AM1805I2CEVB (EVB)

Ordering Information: AM0815AQ AM1815SPIEVB (EVB)

Ordering Information: AM1805AQAM1805I2CEVB (EVB)

Ordering Information: AM1815AQAM1815SPIEVB (EVB)

oriented in the 3 space axes with full functionality.

OTP

OTP and OVP circuit protection

Our Flyback Transformers for battery chargers are customizable.

Our High power Output Filtering Chokes are customizable.

Our High power planar DC filtering chokes are customizable.

Outdoor audio-video system

Outdoor lighting

Outline: 10.0 x 15.4 x 2.0 mm

Outline: 10.0x15.4x2.0 mm

Outline: 21.4 x 14.0 x 2.4max mm

Outline: 3.25 x 8.55 x 0.85 mm

Outline: 3.25 x 8.55 x 1.00 mm

Outline: 5.1 x 11.3 x 1.3 mm

Outline: 5.1 x 11.3 x 1.3 mm MAX

Outline: 5.1x11.3x1.3 mm

Outline: 9.6 x 12.9 x 1.3 mm

Outline: 9.6 x 12.9 x 2.0 mm

Outline: 9.6 x 12.9 x 2.0 mm with 1mm pad pitch

Output 240-460V / <14.7Arms

Output 5

Output 850-400V / <12.5Arms

Output over voltage protection

Output power: +4dBm typ.

Output power: 3dBm typ.

Output power: 8dBm typ.

Output Sec1: 12V/1.5A; Sec2: 12V/0.4A; Sec3: 12V/0.1A

Output Sec1: 12V/1A; Sec2: 12V/100mA; Sec3: 14V/30mA

Output Sec1: 15V/0.1-0.16A; Sec2: +5V / 0.03 to 0.05 A,

OUTPUT Secondary: 220Vdc to 500 Vdc/ 36 Arms,

OUTPUT Secondary: 280 Vdc to 450 Vdc/ 24 Arms max,

Output Sense

Output Sensing

OUTPUT VOLTAGE 8-16 Vdc

Output Voltage Trim

Outputs can be customized

Over Current Protection

Over Temp. and Short Circuit Protection

Over Temperature Protection

Over temperature protection and brown out protection

Over Voltage Protection

Over Voltage/ Over Current/ Short Circuit Protections

Over Voltage/ Over Current/ Short Circuit/ Over Temperature Protections

Overhead Powerlines

Overload and Short Circuit Protection

Overload/Voltage and Short Circuit Protection

Overload/Voltage/Temp. and Short Circuit Protection

Overmolded PFC with a modular structure.

OVP

P&P operations allowed

Package: 2.49 mm x 2.90 mm

Package: 2.5 mm x 2.5 mm

Package: 3 mm x 3 mm

Package: 3.25 mm x 3.37 mm

Package: 4.5 mm x 4.5 mm

Package: 4.7 mm x 4.7 mm

Package: 5 mm x 5 mm

Package: 5.3 mm x 4.3 mm x 0.8 mm

Package: Box

Package: Metal case package

Packs in reels for product protection and easy usage

Parallel resonant choke for 3

Particularly suitable to applications in automotive

Passive inductive receiver

Passive Key Less Entry

Pb-free. (Ni barrier on contact prevents solder wicking)

Peak current: 35 A

Permanent current up to 100 A (0.3 mohm)

PFC Choke for interleaved 3.5kW operation

Phase Common Mode Choke

Pick & Place compatible

Pin Through Hole connection

Pin-out compatible with LM78xx Linear Regulator

Pin-out compatible with LM78xx Linear Regulators

PKE

PLC signal transmission

PMBus 1.2 for Digital Power Management

PNDP-08V-Z connector 2.0mm Pitch 8POS DUAL

Pocket lighting

Positive-lock housing with anti-snag design

Pout=1.5W

Pout=1.75W

Pout=13W

Pout=2.8W

Pout=25W

power and image transfers

Power Consumption: 10 µA/MHz

Power Consumption: 34 µA/MHz

Power Consumption: 4 µA/MHz

Power Consumption: 6 µA/MHz

Power inductive set of 31.5kVA including an isolated 780V/500V transformer and a 65uH resonant choke

Power rating 7

Power rating up to 10 W

Power rating up to 12 W 1

Power rating up to 15 W

Power rating up to 3.5 W at 70 °C (2 mOhm)

Power rating up to 3.5 W at 70°C (2 mOhm)

Power rating up to 4W at 70°C (1.5 mOhm)

Power rating up to 5 W

Power rating up to 6 W 1

Power Switch and Sleep Finite State Machine (FSM): yes

Power: 10W

Power: 11kW LLC 70-400 kHz

Power: 12.5kW / Turn-Ratio: 2:1 / L value: 3400µH

Power: 2-3kW ZVS 100kHz

Power: 2.5kW ZVS 100KW

Power: 2kW ZVS 100kHz

Power: 2kW ZVS 80-100KW

Power: 3.5kW LLC 100-250kHz

Power: 3.5kW LLC 70-200kHz

Power: 3kW ZVS 100kHz

Power: 7kW LLC 80-300 kHz

Power(kW) MAX: 4/10/20

Powerline Monitoring Systems

Primary Currnent 40Arms

Primary dV/dt < 520V/us

Primary/chassis insulation > 1450Vac

Primary/secondary insulation > 6200Vdc

PRIME & CENELEC Band A technology.

process control and many other applications that require reliable and robust miniature sensors.

Processor Frequency: 24 MHz

Processor Frequency: 48 MHz

Processor Frequency: 48 MHz96 MHz turboSPOT®

Processor Frequency: 96 MHz192 MHz turboSPOT

Processor: 32-bit Arm Cortex-M4F DMA

Processor: 32-bit Arm® Cortex®-M4F

Programmable Charging Current: yes

proven products

Pulse power rating 2 J for 10 ms

Pulse transformer for battery management system

Qualified for 20 A-

Qualified for Lead-free Reflow Solder Process According to

Qualified for Lead-free Reflow Solder Process According to IPC/JEDEC J-STD-020D.1

Qualified for Lead-free Reflow Solder Process According to IPC/JEDECJ-STD-020D.1

Quasi-resonant Mode Fly-back

R.V (max): 275 Vac / R.C: 20-80A / Performance: Single&Double Stg

R/W cycles: -

R/W cycles: 10^10

R/W cycles: 10^12

R/W cycles: 10^12 at 85℃

R/W cycles: 10^13

R/W cycles: 10^14

Railway Certified EN 50155 (IEC60571) Approved

Railway EMC Standard EN 50121-3-2 Approved

RAM (Bytes): 256

rate for 1000Vrms Working Voltage

rate for 300Vrms Working Voltage

rate for 480Vrms Working Voltage

Rated current 16 A

Rated current 70A

rated for 1000Vrms Working Voltage

rated for 250Vrms Working Voltage

rated for 300Vrms Working Voltage

rated for 300VrmsWorking Voltage

rated: 16Arms

RC Oscillator: yes

Reading Distance from 6 to 9 meters (depending load Ipp)

Rear fastened type available.

recommended

Recommended coolant temp: 65°C or less

Recommended for Keyless Entry Systems (KES)

Recommended output inductor 1µH / 180Adc

Reference Electrical Field: E-field > 145 (dBµV/m @2App@1 meter @125khz)

Reflow compatible

Regulated Outputs

Reinforced insulation at 3kV in pollution degree 2

Reinforced insulation between prim/sec and with core

Remarkable power density

Remote On/Off

Remote On/Off Control

Remote On/Off Control (option)

Remote On/Off Function

repeatability and accuracy.

replacing FSP040-RHAN2

replacing FSP060-DAAN2

replacing FSP060-DIBAN2

replacing FSP065-REBN2

replacing FSP075-DIBAN2

replacing FSP084-DIBAN2

replacing FSP090-AAAN2

replacing FSP090-ABAN2

replacing FSP090-ABBU3

replacing FSP120-AAAN2

replacing FSP120-ABAN2

replacing FSP120-AHAN2

replacing FSP1200-50ERS

replacing FSP150-1H35-19

replacing FSP150-AAAN2

replacing FSP150-ABAN2

replacing FSP150-AHAN2

replacing FSP180-50LG

replacing FSP180-AAAN2

replacing FSP250-60FAG

replacing FSP250-60LG-5K

replacing FSP250-701UJ

replacing FSP250-70PFL

replacing FSP350-701UJ

replacing FSP350-70LQ

replacing FSP350-70PFL

replacing FSP400-70LQ

replacing FSP460-701UH

replacing FSP500-50FSPT

replacing FSP500-60MRA(S)

replacing FSP500-702UH

replacing FSP550-50ERS

replacing FSP600-801UK

replacing FSP700-70RGHBE1

replacing FSP700-801UK

replacing FSP800-50ERS

Request a quote.

RES. TR+IND 31.5kVA 780V/500V 44-152kHz 65uH

Reset Management: yes

Resetable power shut down

Resettable power shut down

Resistor with Kelvin connection

Resonant frequency adjusting below /- 2kHz.

Resonant inductance 20µH

Reverse side covered with gold ﬂash (0.1 µm typ.)

RF Sensitivity: -93 dBm

RF Sensitivity: -95 dBm

Ripple current 18.6 Appk

Robotic tested: yes

robustness

RoHS

RoHS 2011/65/EU compliant

RoHs compliant

RoHS compliant / Complete Lead Free

RoHS Conformity

RTMPS

RTPMS and Keyless Go

Safety Approval to UL/cUL/IEC/EN 62368-1

Safety Approval to UL/cUL/IEC/EN 62368-1(60950-1)

Same Quality factor in the three axis.

Same sensitivity in the three axis.

SCP and FFP protection

Screw locking mechanism.

SDTR1103-0019J is customizable.

SDTR1103-0238J is customizable.

SDTR1103-0266J is customizable.

SDTR1103-0477J is customizable.

SDTR1103-0491J is customizable.

SDTR1103-0720J is customizable.

SDTR1103-0900J is customizable.

SDTR1103-HF1-0100J is customizable.

SDTR1103-HF1-0290K is customizable.

SDTR1103-HF1-0400K is customizable.

SDTR1103-HF2-0001K is customizable.

SDTR1103-HF2-0002K is customizable.

SDTR1103-HF2-0003K is customizable.

SDTR1103-HF2-0006K is customizable.

SDTR1103-HF2-0020K is customizable.

SDTR1103CAP-0238J is customizable.

SDTR1103CAP-0491J is customizable.

SDTR1103CAP-0720J is customizable.

SDTR1103CAP-0900J is customizable.

SEC Inductance (mH) MIN: 1-16

SEC Inductance (mH) MIN: 5

SEC Resistance (Ω) MAX: 0.2-4.3

SEC Resistance (Ω) MAX: 1.6

Secondary/chassis insulation > 2750Vdc

Secundary Current 80Arms

Secure locking structure

Security: secureSPOT 2.0

Security: secureSPOT®

Security: WPA-2 using AES/CCMP along with legacy security features

Semi-regulated Output Voltage

Semi-Slim Shape

Sendust core performant and cost effective solution

Sensitivity high inductance.

Sensitivity over 20mV/A/m

Sensor

Serial resonant choke for 3

Serial resonant choke for 3.5kW half-bridge LLC

Serial ZVS choke for 2-3kW full-bridge converter

SG3 models support reconnection mechanism.

Shape H bridge (best performance electrical on metal surfaces).

Shielded metal Case with Insulated Baseplate

Short Circuit Protection

Short circuit protection on all outputs

Short Range Antenna - 40x19x4mm / 345uH

Short Range Antenna - 40x19x4mm / 500uH

Short Range Antenna - 68x07x3mm / 240uH

Short Range Antenna - 68x07x3mm / 300uH

Short Range Antenna - 68x07x3mm / 332uH

Short Range Antenna - 68x07x3mm / 426uH

Short Range Antenna - 68x07x3mm / 500uH

Short Range Antenna - 75x15x6.3mm / 345uH

Short Range Antenna - 75x15x6.3mm / 500uH

Short Range Antenna - 80x19x4mm / 322uH

Short Range Antenna - 80x19x4mm / 345uH

Short Range Antenna - 80x19x4mm / 500uH

Short Range Emitter Antenna - 103x20x9mm / 345uH

Short Range Emitter Antenna - 103x20x9mm / 426uH

Short Range Emitter Antenna - 103x20x9mm / 500uH

Short Range Emitter Antenna - 116.75x19.5x21mm / 127uH

Short Range Emitter Antenna - 116.75x20x23mm / 205uH

Short Range Emitter Antenna - 116.75x20x23mm / 240uH

Short Range Emitter Antenna - 140x15.6x12.6mm / 285uH

Short Range Emitter Antenna - 141x20x20mm / 205uH

Short Range Emitter Antenna - 141x20x20mm / 25uH

Short Range Emitter Antenna - 50.80x10.60x6.80mm / 0.192mH

Short Range Emitter Antenna - 50.80x10.60x6.80mm / 300uH

Short Range Emitter Antenna - 50.80x10.60x6.80mm / 345uH

Short Range Emitter Antenna - 50.80x10.60x6.80mm / 500uH

Short Range Emitter Antenna - 50.80x10.60x6.80mm / 734uH

Short Range Emitter Antenna - 70.3X15X7.2mm / 285uH

Short Range Emitter Antenna - 75x15x6.3mm / 108uH

Short Range Emitter Antenna - 75x15x6.3mm / 141uH

Short Range Emitter Antenna - 75x15x6.3mm / 162uH

Short Range Emitter Antenna - 75x15x6.3mm / 207uH

Short Range Emitter Antenna - 75x15x6.3mm / 240uH

Short Range Emitter Antenna - 75x15x6.3mm / 300uH

Short Range Emitter Antenna - 75x15x6.3mm / 345uH

Short Range Emitter Antenna - 75x15x6.3mm / 426uH

Short Range Emitter Antenna - 75x15x6.3mm / 500uH

Short Range Emitter Antenna - 85x16.8x7mm / 345uH

Short Range Emitter Antenna - 85x16.8x7mm / 426uH

Short Range Emitter Antenna - 85x16.8x7mm / 500uH

show a very good electrical performance as well

Single 12V Rails Fulfill all System Demand

Single Mode Bluetooth® low energ

Single Mode Bluetooth® low energy

Single Mode Bluetooth® low energy / 802.15.4 radio support

Single power supply: 1.7 - 5.5V

Single power supply: 1.7 – 3.6V

Size 4.2x3.5x3.2 mm

Size 4027

Size similar to TO 247

Small Footprint: 26 x 9.2 mm (1.02”x 0.36”)

Small mounting area

Small size

Smallest Encapsulated 10W Converter

Smallest Encapsulated 12W Converter

Smallest Encapsulated 15W Converter

Smallest Encapsulated 20W Converter

Smallest Encapsulated 25W Converter

Smallest Encapsulated 2W Converter

Smallest Encapsulated 30W Converter

Smallest Encapsulated 3W Converter

Smallest Encapsulated 40W Converter

Smallest Encapsulated 50W Converter

Smallest Encapsulated 5W Converter

Smallest Encapsulated 6W Converter

Smallest Encapsulated 8W Converter

Smallest size of the market (7x7mm)

Smart Fan Speed Control Provide Ultra Silent Working Environment

SMD mounting

SMD solution

SMD type

SMD type module. with trace ANT

Software Embedded by Taiyo Yuden

Software: HTTP client - HTTPs client - WPS - IEEE power save/Deep sleep - Firmware update

Solderable.

Solid metal precision resistance materials

SPI - UART - I2C - I2S - PDM and 12bit ADC

SRAM: 1.4MB

SRAM: 2.75MB

SRAM: 256KB

SRAM: 384KB

SRAM: 64KB

SRAM: 768KB

Standard pad size (0805)

Standard pad size (2010)

Static Bending Radius: 20mm

Storage temperature - 40 to 85 °C

Storage temperature -25°C to +85 °C

Storage temperature -25C to +85C

Storage temperature -40°c to+105°c

Storage temperature: -40 °C to 85 °C

Strong anchor points which provide an easy assembly and will ensure mechanical

Strong anchor points which provide an easy assembly.

Suitable for AMR

Suitable for AOI

Suitable for Automatic Metering Reading

Suitable for Automotive BMS in onboard battery chargers

Suitable for Automotive BMS in xEV (ex: TI SN6505A/B chips)

Suitable for Automotive DCDC onboard HV/LV converters

Suitable for Automotive embedded battery chargers and Industrial high power SMPS

Suitable for Automotive EV/PHV AC/DC onboard battery chargers

Suitable for Automotive EV/PHV AC/DC onboard battery chargers and HV/LV DC/DC converters

Suitable for Automotive HEV DC/DC Converters and Battery Chargers

Suitable for automotive HV/LV DCDC onboard converters

Suitable for automotive inverters for electrical motors in EV/PHV

Suitable for automotive Key Less Entry applications with miniaturized designs.

Suitable for Automotive Passive keyless entry systems and Automotive RTPMS with wake up functions.

Suitable for Automotive Passive keyless entry systems and automotive RTPMS.

Suitable for Automotive passive keyless entry systems and automotive TPMS

Suitable for Automotive PFC stage in onboard battery chargers

Suitable for Automotive xEV inverters (IGBT control)

Suitable for AutomotiveEV/PHVAC/DConboardbatterychargers

Suitable for EV/PHV AC/DC on board battery chargers

Suitable for EV/PHV AC/DC onboard battery chargers

Suitable for Half- or full-bridge MOS transistors control in SMPS and Automotive EV/HEV DC/DC converters.

Suitable for High current Output chokes

Suitable for HV/LV DCDC onboard converters

Suitable for Keyless entry systems

Suitable for Keyless entry systems. Due to its small dimensions

Suitable for OBC

Suitable for OBC,,Lp 160uH Lr = 13uH,Lk = 5uH Turn ratio = 0.8,Power: 7kW LLC 80-300 kHz,,Designs can be fully customized.,,

Suitable for OBC,Lp 150uH Lr = 25uH,Lk = 6uH Turn ratio = 0,6,Power: 11kW LLC 70-400 kHz,Designs can be fully customized.,

Suitable for PFC Stage for OBC

Suitable for Pick&Place SMD assembly

Suitable for power components for HE Onboard Automotive SMPS

Suitable for Smartphone and Pick&Place SMD assembly.

Suitable for Suitable for lightning detector

Suitable for Surface Mountable according market standards.

Suitable for the wireless power transfer in the electric vehicles.

Suitable for wireless power transfer in Smartphones

Suitable for: Automotive

Suitable for: Automotive Passive keyless entry systems

Suitable for: automotive passive keyless entry systems among others.

Suitable for: Door handle for Smart Key (NFC) secure car access and Demo kit for developing Smart Key applications

Suitable for: Hearing aid devices

Suitable for: KES

Suitable for: KES and TMS.

Suitable for: Keyless entry systems and Tyre Pressure Monitoring Systems.

Suitable for: Keyless Go and Keyless entry systems.

Suitable for: NFC applications

Suitable for: NFC applications and RFID applications with ISO15693 (vicinity: I-CODE)

Suitable for: Pick&Place SMD assembly- Taped & Reeled.

Suitable for: RFID readers at 13.56mH and NFC applications at 13.56

Suitable for: TPMS

Suitable for: TPMS moulded solutions

Superior electrical stability over application lifetime

Supply Current (max): < 55 nA with crystal oscillator

Supply Current (medium): < 22 nA with RC oscillator and autocalibration

Supply Current (min): < 14 nA with RC oscillator

Supply range :1.60 - 3.6 V

Supply range :1.65 - 1.95 V

Supply range :1.7 - 1.95 V

Supply range :1.7 - 3.6 V

Supply range :1.8 - 3.6 V

Supply range :2.7 - 3.6 V

Supply range :2.7 - 5.5 V

Supply range :3.0 - 3.6 V

Supply range :3.0 - 5.5 V

Supply Voltage: 1.71-2.2 V

Supply Voltage: 1.755-3.63 V

Supply Voltage: 2.2-3.8 V

Support OCP

Support OTP

Supports 1.9Gbps band in-vehicle deserializer

Supports high frequency up to 6GHz

Supports up to 1080p/60fps input

Surge protection ±2 KV diff.

Surveillance system

Switch and LED.

Switching frequency 100kHz

Switching frequency 120-160kHz (140KHz TYP)

Switching Frequency 130 kHz,

Switching frequency 250kHz

Switching frequency 300-600kHz (450KHz TYP)

Switching Frequency 480kHz

Switching Frequency 50kHz - 300kHz

Switching frequency 80kHz

Switching frequency 84kHz,

Switching frequency: 145-200KHz

Switching frequency: 145-250KHz

Switching Frequency: 60kHz

Switching frequncy: 98-150KHz

Tape & Reel Package Available

Taped & Reel: 3000pcs / reel.

Taped & Reeled

TC0502-04000J is customizable

TC0502-14000J is customizable

TC0502-17000J is customizable

TC0502-27000J is customizable

TC0502HF-0002K is customizable.

TC0502HF-00047K is customizable.

TC0902-26000J is customizable

TC0902-34000J is customizable

TC1102-35000J is customizable

TC1102-46000J is customizable

tcr-values

TCR-values from 1 ppm/K

telecontrol

Temperature coefficient (20-60 °C) of resistance material:

Temperature range :-40 - 105 °C

Temperature range :-40 - 125 °C

Temperature range :-40 - 85 °C

Temperature range :-40 - 95 °C

Temperature range :-55 - 85 °C

temperature range (-40

Temperature Range: -20°C to 60°C

Temperature Range: -40°C to 85°C

Terminals available in gold and tin plating

Terminals: Ag-Ni-Sn100

The cap improves the mechanical protection of the coil.

The cap provides a strong solution in very small dimensions.

The cap provides an additional mechanical protection to the coil.

The connector integrated in the external housing plastic.

The foam absorbs better the shocks improving the mechanical performance of the piece.

The most compact connector type in M series connectors.

The PBM increased coupling factor "K".

This component is also functional to 20kHz and 134kHz.

This component is functional also to 20kHz and 134kHz.

This component is functional at 125kHz and 13.56MHz (NFC applications)

THT mounting,

THT technology.

thus the energy

time-saving while maintaining excellent performance

TOPOLOGY Dual active bridge Trafo

Topology H-CMC

Topology PFC Choke

Topology: 4 Phase Common Mode Choke

Total energy consumption and battery current leaking.

Total losses 0.08 W

Total losses 0.2 W

Total losses 0.51 W

Total losses 2 W

Total losses 22.7

Total losses 30 W

Total Output current up to 261 Adc

Total output power Approx. 10 W (nominal)

Total output power Approx. 2.6 W

TP0502CAP-0589J is customizable.

TP0502CAP-0720J is customizable.

TP0502CAP-1600J is customizable.

TP0602-0238J is customizable.

TP0602-0491J is customizable.

TP0602-0720J is customizable.

TP0602-0900J is customizable.

TP0602-TC-04000J is customizable

TP0602CAP-0238J is customizable.

TP0602CAP-0491J is customizable.

TP0602CAP-0720J is customizable.

TP0602CAP-0900J is customizable.

TP0602CAP-1080J is customizable.

TP0702-0238J is customizable.

TP0702-0491J is customizable.

TP0702-0720J is customizable.

TP0702-0900J is customizable.

TP0702CAP-0238J is customizable.

TP0702CAP-0491J is customizable.

TP0702CAP-0720J is customizable.

TP0702CAP-0900J is customizable.

TP0702U-0238J is customizable.

TP0702U-0491J is customizable.

TP0702U-0720J is customizable.

TP0702U-0900J is customizable.

TP0702UCAP-0238J is customizable.

TP0702UCAP-0491J is customizable.

TP0702UCAP-0720J is customizable.

TP0702UCAP-0900J is customizable.

TP0702UCAP-1850J is customizable.

TR1102-0238J is customizable.

TR1102-0491J is customizable.

TR1102-0720J is customizable.

TR1102-0900J is customizable.

TR1102CAP-0238J is customizable.

TR1102CAP-0491J is customizable.

TR1102CAP-0720J is customizable.

TR1102CAP-0900J is customizable.

Transmitting low frequency.

Turn-ratio: 1:1:1.3:1.3

Turn-ratio: 1:1:5

Turn-ratio: 1:1+1

Turn-ratio: 1+1:12 push-pull

Turn-ratio: 2:1

Turn-ratio: 20:1 Total output power: 1.8kW Inductance: 25uH

Turn-ratio: 26:1+1 full-bridge

Turn-ratio: 3:2 (phase-shift full-bridge with current-doubler)

Turn-ratio: 30:1+1 full-bridge

Turn-ratio: 4+16:16 Inductance: 66.2µH

Turn-ratio: 5:1

Turn-Ratio: 6 16: 12 Power: 11.6kW Inductance: 20µH

Turn-ratio:1:1 / Freq: 70-200kHz

Turn-ratio:1:2 / Freq: 100-250kHz

Turn-ratio:1.15 / Freq: 100kHz

TUV

TUV IEC/EN 60335-1 & CE Marking IEC/EN 60335-1 & CE Marking

TUV/IEC/EN 60335-1 Safety Approval & CE Marking Approval & CE Marking

Two terminal configuration

Tx Output Power: Up to 3 dBm

Tx Output Power: Up to 6 dBm

Typical switching frequency 100kHz

Typical temperature coefficient Ls/°C: 200±50ppm/°C.

UART: 1

UART: 2

UART: 4

UKCA

UL/cUL/IEC/EN 60950-1 Safety Approval

UL/cUL/IEC/EN 60950-1 Safety Approval & CE Marking

UL/cUL/IEC/EN 62368-1 Safety Approval

UL/cUL/IEC/EN 62368-1 Safety Approval & CE Marking

UL/cUL/IEC/EN 62368-1(60950-1)

UL/cUL/IEC/EN 62368-1(60950-1) Safety Approval

UL/cUL/IEC/EN 62368-1(60950-1) Safety Approval & CE Marking

UL508 Safety Approval Specifically for Industrial Application

UL94

UL94 & RoHS materials / AEC-Q200 qualified

UL94 and RoHS materials

UL94 and RoHS materials (F/155°C)

UL94V

UL94V and RoHS materials

UL94V-0 and RoHS material

UL94V-0 material

Ultra Compact Size 1.0" x 1.0" x 0.64"

Ultra Compact Size 1.5 x 1.0 x 0.6"

Ultra Compact Size 1.52x1.00x0.66"

Ultra Compact Size 2.06 x 1.07 x 0.93"

Ultra Compact Size 2.06x1.07x0.93 "

Ultra Compact Size 2.52x1.77x0.94 "

Ultra Compact Size 2.99x2.13x1.10 "

Ultra-compact 1" X 1" Package

Ultra-compact 1"×1" Package

Ultra-compact 2" X 1" Package

Ultra-compact DIP-8 Package

Ultra-compact SIP-8 Package

Ultra-high I/O Isolation 5200VDC

Ultra-high I/O Isolation 5700VDC

Ultra-high I/O Isolation 8000VDC with Reinforced Insulation

Ultra-high I/O Isolation 9000VDC with Reinforced Insulation

Ultra-high Isolation 8000VDC with Reinforced Insulation

Ultra-low ESR and highest ripple current

Ultra-Low profile. Best in market.

Ultra-wide 2:1 Input Voltage Range

Ultra-wide 4 : 1 Input Voltage Range

Ultra-wide 4:1 Input Range

Ultra-wide 4:1 Input Voltage Range

Ultra-wide Input Range 36-160VDC

Ultra-wide Input Range 9-36VDC

Ultra-wide Input Ranges 9-36VDC

UNB Current: 165mA

Under-Voltage

Under-voltage and Short Circuit Protection

Universal Input 85-264VAC

Universal Input 85~264VAC

Unregulated Output Voltage

Up to 10 W

Up to 10 W permanent power

up to 2.67 MS/s Sampling Rate ADC

up to 2.8 MS/s Sampling Rate ADC

up to 2000A pulse current

up to 800 kSps Sampling Rate ADC

USB Type-C can be used in simultaneous interactions and operations with top-notch interface technologies.

USB Type-C is the industry-leading connection interface used in data

Vacuum-impregnated transformer

Vaux/Iaux =18.3 V/10mA

VBAT Switch: yes

Very Compact SMD Package

Very good electrical and mechanical performance.

Very good electrical performance.

Very good mechanical performance.

Very High Efficiency up to 88.5%

Very High Efficiency up to 88%

Very High Efficiency up to 89%

Very high precision of tolerance and TCR

Very high reproducibility of r-value and tcr

Very Low No Load Power Consumption

Very stable electrical properties in full operational

Very stable electrical properties in full operational operative range (-20°C ® 65°C)

Very stable electrical properties in full operational operative range (-40°C ® 125°C)

Very stable electrical properties in full operational operative range (-40°C 85°C)

Very stable electrical properties in full operational temperature.

Very stable performances versus temperature

Vibration and Shock/Bump Test EN 61373 Approved

Vibration-proof (VP) version (up to 30g) available upon request

Vier-Leiter Messwiderstand

Vin Range =(200-380)V

Vin Range =(7-8)V

Vin=12V

Vin=210V

Vin=6V

Vin=8V

Vin=9V

Vout/Iout = 5V/50mA

Vout/Iout =(2x) 15V/60mA

Vout/Iout =12V/800mA

Watchdog Timer (WDT): yes

Water resistant (IP65).

Water-washable Process Available(option)

Weight : approx 150grams

Weight : approx 200grams

Weight : approx 33g

Weight : approx 350grams

Weight : approx 4.3

Weight : approx 40grams

Weight : approx 45grams

Weight 145g

Weight: <15 g.

Weight: 1250 grams

Weight: 25gram approx

Weight: 3gram approx.

Weight: 465.5g

Weight: 6gram approx

Weight: 70gram approx

Weight: approx 100grams

Weight: approx 110grams

Weight: approx 120grams

Weight: approx 12g

Weight: approx 15g,

Weight: approx 2grams

Weight: approx 30grams

Weight: approx 33

Weight: approx 35grams

Weight: approx 4.3g

Weight: approx 52grams

Weight: approx 55grams

Weight: approx 60grams

Weight: approx 90grams

Weight: Approx. 180 grams

Weight: approx. 3grams

Weight: less than 5g

Weight:approx 37g.

Well Working Performance at 50°C

Well working performance at 50°C (24 house running)

Well working performance at 55°C (24 hours running)

which is expected to become the connector replacing all other protocols in the industry. With backward compatibility with USB 3.0 and 2.0

Wide 2 : 1 Input Voltage Range

Wide 2:1 & 3:1 Input Voltage Range

Wide 2:1 Input Voltage Range

Wide 4:1 Input Voltage Range

Wide Input Range 43-101VDC & 66-160VDC

Wide operating temperature range -40 to +105°C

Wide operating temperature range -40 to +125°C

Wide operating temperature range -40 to +140°C

Wide orperating temperature range -40 to +125°C

Wide working range (20kHz - 150KHz).

Wight: 5g

Wire: H

Wireless Power Transfer class 1 (1 W) Following QI normative.

Wireless Power Transfer class 1 (1W)

With cover cap or labelled.

With foam label.

With PFC Circuit

Withdrawal Force Min 3kgf

Work frequency LF: fo= 20Khz

Working frequencies: 125 kHz

Working frequencies: 125 kHz and 134.2 kHz

Working Frequencies: 20kHz

Working frequency 100 kHz

Working frequency 20KHz

Working frequency from 100 to 250kHz

Working frequency from 50 to 250kHz

Working frequency from 90 to 125kHz

Working frequency: 120 kHz

Working frequency: 125 kHz

Working frequency: 20 kHz

Working temperature -40C to +105C

Working voltage up to 500Vdc

Works with Lp = 130µH and Cr = 100nF

Works with Lp = 36µH and Cr = 312nF

Works with Lr = 22µH and Cr = 33nF

Works with Lr = 6.3µH and Cr = 312nF

Worldwide Input Voltage 100Vac-240Vac

Y]; >40mV/A/m [Z])

ZAC1203-0238J is customizable.

ZAC1203-0491J is customizable.

ZAC1203-0638J is customizable.

ZC1003-0073J is customizable.

ZC1003-0238J is customizable.

ZC1003-0266J is customizable.

ZC1003-0491J is customizable.

ZC1003-0720J is customizable.

ZC1003-0900J is customizable.

ZC1003HF-00022K is customizable.

ZC1003HF-00045K is customizable.

ShinDengen Electric MFG.CO.,LTD.

P60B4EL: Power MOSFET

Out of stock

Status

Features

No features were found

Applications

ShinDengen Electric MFG.CO.,LTD.

S60L120D: Fast Recovery Diode

Out of stock

Status

Features

No features were found

Applications

ShinDengen Electric MFG.CO.,LTD.

SG10L20USM: Fast Recovery Diode

Out of stock

Status

Features

No features were found

Applications

ShinDengen Electric MFG.CO.,LTD.

D4F60-5063: Fast Recovery Diode

Out of stock

Status

Features

No features were found

Applications

ShinDengen Electric MFG.CO.,LTD.

D1FS4-5053: Fast Recovery Diode

Out of stock

Status

Features

No features were found

Applications

ShinDengen Electric MFG.CO.,LTD.

D1FS4-5103: Fast Recovery Diode

Out of stock

Status

Features

No features were found

Applications

ShinDengen Electric MFG.CO.,LTD.

S10VTA80: Bridge Diode

Out of stock

Status

Features

No features were found

Applications

ShinDengen Electric MFG.CO.,LTD.

M3FE60-5063: Fast Recovery Diode

Out of stock

Status

Features

No features were found

Applications

ShinDengen Electric MFG.CO.,LTD.

M3FE60-5073: Fast Recovery Diode

Out of stock

Status

Features

No features were found

Applications

ShinDengen Electric MFG.CO.,LTD.

D10FY60VE-5063R: Fast Recovery Diode

Out of stock

Status

Features

No features were found

Applications

ShinDengen Electric MFG.CO.,LTD. Datasheets

Learn more about our products

No products found

ShinDengen Electric MFG.CO.,LTD. Articles

Read about the latest news

18/02/2025

ShinDengen Electric MFG.CO.,LTD.

Learn more about our products

Read about the latest news

2000 Followers on LinkedIn

Partnership Announcement

Leading Employer KAGA FEI Europe 2025

Fujitsu is now RAMXEED: A Milestone in Corporate History

World’s smallest Bluetooth Low Energy module ES4L15BA1

Fujitsu released new 4Mbit FeRAM

Get in contact with us!

About us

Technologies

Services

News

Stay up to date

Our socials

Account login

ShinDengen Electric MFG.CO.,LTD.

Learn more about our products

Read about the latest news

2000 Followers on LinkedIn

Partnership Announcement

Leading Employer KAGA FEI Europe 2025

Fujitsu is now RAMXEED: A Milestone in Corporate History

World’s smallest Bluetooth Low Energy module ES4L15BA1

Fujitsu released new 4Mbit FeRAM

Get in contact with us!

About us

Technologies

Services

News

Stay up to date

Our socials

Account login

Get in Contact!